Type M6 with full thread
ARNOLD standard floor screws for commercial vehicles
As a partner to the international mobility industry, for decades ARNOLD has been providing quality technical expertise and service in the field of fastening systems for commercial vehicles. We are the “preferred supplier” for well-known companies such as MAN and Mercedes Benz – and thus for you too, we are always at the peak of design and technology.
Benefits
The ARNOLD M6 full thread standard floor screw is the ideal solution where a bore of the same diameter is made through wood and steel frames. So you benefit from the high strength created by case hardened steel up to RM = 520 N/mm².
Characteristics
The M6 has a TAPTITE 2000® thread, is particularly easy to set, and has an impressively low tapping torque and excellent vibration resistance. With its countersunk head, it firmly fastens the wooden floor to the frame. The Torx T40 drive ensures maximum service life for the bit.
The DELTA PROTECT KL100 finish is implemented to ensure maximum corrosion protection (720-hour spray test). The Delta Seal Black GZ surface coating gives the screw a high-quality visual appearance, while the GLEITMO 605 low-friction coating ensures improved tapping torque.
Advantages
Particularly when it is combined with ARNOLD's processing systems – perfectly adapted to the screw – the M6 offers many plus factors:
- A see-through magazine makes it easy to prepare screws in the magazine
- The adjustable drill speed prevents premature wear from annealing
- Consistent pressure from the pneumatic cylinder makes for effortless drilling and driving
- With its adjustable drilling and screwing depths, there is no need for reworking – it achieves the optimum screw fastening scenario
- Optional chip extraction means even cleaner working
- Compressed air cleaning ensures the hole is free of dust
- Laser cross-hair positioning makes it easier to find the correct position for assembly
- A pneumatic lifting mechanism ensures easy movement and stable standing with its easy-run guide rollers
- The standing work position ensures the best possible work safety and top-class ergonomics
As a partner to the international mobility industry, for decades ARNOLD has been providing quality technical expertise and service in the field of fastening systems for commercial vehicles. We are the “preferred supplier” for well-known companies such as MAN and Mercedes Benz – and thus for you too, we are always at the peak of design and technology.
Characteristics
The M6 has a TAPTITE 2000® thread, is particularly easy to set, and has an impressively low tapping torque and excellent vibration resistance. With its countersunk head, it firmly fastens the wooden floor to the frame. The Torx T40 drive ensures maximum service life for the bit.
The DELTA PROTECT KL100 finish is implemented to ensure maximum corrosion protection (720-hour spray test). The Delta Seal Black GZ surface coating gives the screw a high-quality visual appearance, while the GLEITMO 605 low-friction coating ensures improved tapping torque.
Benefits
The ARNOLD M6 full thread standard floor screw is the ideal solution where a bore of the same diameter is made through wood and steel frames. So you benefit from the high strength created by case hardened steel up to RM = 520 N/mm².
Advantages
Particularly when it is combined with ARNOLD's processing systems – perfectly adapted to the screw – the M6 offers many plus factors:
- A see-through magazine makes it easy to prepare screws in the magazine
- The adjustable drill speed prevents premature wear from annealing
- Consistent pressure from the pneumatic cylinder makes for effortless drilling and driving
- With its adjustable drilling and screwing depths, there is no need for reworking – it achieves the optimum screw fastening scenario
- Optional chip extraction means even cleaner working
- Compressed air cleaning ensures the hole is free of dust
- Laser cross-hair positioning makes it easier to find the correct position for assembly
- A pneumatic lifting mechanism ensures easy movement and stable standing with its easy-run guide rollers
- The standing work position ensures the best possible work safety and top-class ergonomics
Your ARNOLD Extra: tailored processing devices
Choose the optimum application for your ARNOLD screws with our processing systems, precisely coordinated with our fasteners. Our ASA screwdriving systems have been developed especially for fastening floors. When combined with ARNOLD's thread-forming TAPTITE® 2000 screws, you can achieve optimum fastening results. We have focussed particularly closely on work safety and processing speed. With additional options, we are in a position to optimise your costs even further. Get in touch with us to find out more.
