ARNOLD's Strux® is your first choice for heavy loads and thicker metals. The screw is suitable for steel and aluminium (sheet thicknesses of 2 to 5 mm and strength classes 8.8 and 10.9). The option to process several self-clinch screws in a single stroke makes it particularly efficient to use.
Advantages
As an alternative to welding, STRUX® self-clinching screws from ARNOLD offer the following plus points:
- Lower hazardous emissions
- Less energy required
- Inspection and control costs are reduced
- There is no thermal weakening at the fastening position
ARNOLD's Strux® is your first choice for heavy loads and thicker metals. The screw is suitable for steel and aluminium (sheet thicknesses of 2 to 5 mm and strength classes 8.8 and 10.9). The option to process several self-clinch screws in a single stroke makes it particularly efficient to use.
Your ARNOLD Plus: a comprehensive complete solution from a single supplier
As well as these top-class fasteners, you get the system technology, perfectly adapted by ARNOLD. You have a single contact for the entire system and can obtain all your components from a single source. And to ensure you are even better prepared for production ARNOLD provides all the joining parameters you need. Start with "Plug and Play" during the pre-production stage, make your final improvements, and with this top-class arsenal behind you you are ready to embark on your series production run. You save a great deal of time and money in your closely coordinated start-up and ramp-up schedule.
STRUX® is a registered trademark of Acument Intellectual Properties LLC
