Type M6 with full thread and milling ribs

ARNOLD standard floor screws for commercial vehicles

This screw is also based on our comprehensive experience, gained over decades as a trusted partner to major commercial vehicle manufacturers – for example, we are a "preferred supplier" for MAN and Mercedes Benz. Benefit from our state-of-the-art expertise to ensure that every single detail is right when it comes to fastening the floors.

Benefits

The ARNOLD M6 standard floor screw with full TAPTITE 2000® thread and milling ribs is the ideal solution where a bore of the same diameter is made through wood and steel frames. Case hardened steel up to RM = 520 N/mm² is your high strength guarantee.

Characteristics

Particularly easy to set, low tapping torque, excellent vibration resistance. The tried and tested TAPTITE 2000® thread on this screw offers a wide range of convincing features. The milling ribs below the head mill the screw head contour into the wood, thus providing optimum hold. The Torx T40 drive ensures maximum bit service life.

The VH 301 GZ silver coating provides a high-quality look, while corrosion does not stand a chance against the DELTA PROTECT KL100 surface coating (720-hour salt-spray test). Tapping torque also gets a boost from the finish we use – GLEITMO 605 low-friction coating.

Advantages

The perfect screw plus the perfectly adapted ARNOLD processing technology. This is your guarantee of efficient, safe working, providing excellent results:

  • Easy screw supply helped by the see-through magazine
  • Less drill wear caused by annealing – because the drill speed is adjustable
  • Effortless drilling and driving due to the consistent pressure provided by the pneumatic cylinder
  • No reworking and optimum screw fastening scenario due to the adjustable drilling and screwing depths
  • Clean work processes – with optional chip extraction system
  • Dust-free borehole with compressed air
  • Easier to find the drive position with the laser cross-hair positioning system
  • Easy movement and stable standing due to pneumatic lifting device with easy-run guide rollers
  • First-class safety and ergonomics with the stand-up working position

This screw is also based on our comprehensive experience, gained over decades as a trusted partner to major commercial vehicle manufacturers – for example, we are a "preferred supplier" for MAN and Mercedes Benz. Benefit from our state-of-the-art expertise to ensure that every single detail is right when it comes to fastening the floors.

Characteristics

Particularly easy to set, low tapping torque, excellent vibration resistance. The tried and tested TAPTITE 2000® thread on this screw offers a wide range of convincing features. The milling ribs below the head mill the screw head contour into the wood, thus providing optimum hold. The Torx T40 drive ensures maximum bit service life.

The VH 301 GZ silver coating provides a high-quality look, while corrosion does not stand a chance against the DELTA PROTECT KL100 surface coating (720-hour salt-spray test). Tapping torque also gets a boost from the finish we use – GLEITMO 605 low-friction coating.

Benefits

The ARNOLD M6 standard floor screw with full TAPTITE 2000® thread and milling ribs is the ideal solution where a bore of the same diameter is made through wood and steel frames. Case hardened steel up to RM = 520 N/mm² is your high strength guarantee.

Advantages

The perfect screw plus the perfectly adapted ARNOLD processing technology. This is your guarantee of efficient, safe working, providing excellent results:

  • Easy screw supply helped by the see-through magazine
  • Less drill wear caused by annealing – because the drill speed is adjustable
  • Effortless drilling and driving due to the consistent pressure provided by the pneumatic cylinder
  • No reworking and optimum screw fastening scenario due to the adjustable drilling and screwing depths
  • Clean work processes – with optional chip extraction system
  • Dust-free borehole with compressed air
  • Easier to find the drive position with the laser cross-hair positioning system
  • Easy movement and stable standing due to pneumatic lifting device with easy-run guide rollers
  • First-class safety and ergonomics with the stand-up working position

Achieve even more – with perfectly adapted ARNOLD processing technology

If you want to realize the full potential of the M6, choose ARNOLD system solutions – in perfect harmony with this screw. We offer you ASA screwdriving systems – specially designed for fastening floors – to obtain perfect results with the thread-forming TAPTITE 2000® thread-tapping screw. Safe and fast working are our top priorities here. Would you like to learn more about our wide range of solutions? Our experts can give you their professional advice.

Everything you need.

You may also be interested in

Ask for a personal consultation from our experts.

ARNOLD bei FacebookARNOLD bei LinkedInARNOLD bei XingARNOLD bei Youtube

© 2021 ARNOLD UMFORMTECHNIK GmbH & Co. KG