There is a host of tasks where standard torque performance is simply not enough. This is where Rivtex® from ARNOLD, the self-punching clinch nut, provides the optimum solution. Whichever processing method you choose – manual, semi-automated or fully automated – Rivtex® fits the bill.
Characteristics
The Rivtex® pierce nut can punch from 0.75 mm to 2 mm creating a flush surface, and if necessary is also suitable for creating a self-locking thread. At the same time, it is convincing for its excellent press-out and torque values.
Advantages
Self-punching pierce nuts offer considerable advantages compared with welding.
- The thread is not affected by weld spatter
- The nuts are extremely resistant to corrosion
- They prevent heat weakening at the fastening point
There is a host of tasks where standard torque performance is simply not enough. This is where Rivtex® from ARNOLD, the self-punching clinch nut, provides the optimum solution. Whichever processing method you choose – manual, semi-automated or fully automated – Rivtex® fits the bill.
Characteristics
The Rivtex® pierce nut can punch from 0.75 mm to 2 mm creating a flush surface, and if necessary is also suitable for creating a self-locking thread. At the same time, it is convincing for its excellent press-out and torque values.
Advantages
ARNOLD's strengths: seamless system expertise
ARNOLD is your expert system supplier. This means that in addition to high-performance fasteners we also supply the full palette of processing technology plus all the joining parameters you need. The result is that you are fully equipped for production – starting with "plug and play" during the pre-production run, easily implemented final adjustments, and you are perfectly prepared for SOP. Use our knowledge and expertise and reduce the amount of time you spend, along with your costs, during your closely coordinated start-up and ramp-up schedule.
Rivtex® is a registered trademark of Nedschroef Schrozberg GmbH