Standard floor bolts

ARNOLD screws keep your supply chain connected.

Used for

Fastening HGV load floors in situations where a bore of the same diameter is made through wood and steel frames.

 

Characteristics of screw

  • Taptite 2000® thread
    • Easy to position
    • Low tapping torque
    • High vibration resistance
  • Countersunk head: to fasten the wooden floor firmly to the frame
  • T40 Torx drive: maximum bit service life
  • Full thread
  • High strength due to case hardened steel up to RM = 520 N/mm2

 

Features of finish

  • DELTA PROTECT KL100 surface: Maximum corrosion protection – 720 hour spray test
  • Delta Seal black GZ coating: high quality visual appearance
  • GLEITMO 605 anti-friction coating: for improved tapping torque

Used for

Fastening HGV load floors in situations where a bore of the same diameter is made through wood and steel frames.

 

Characteristics of screw

  • Taptite 2000® thread
    • Easy to position
    • Low tapping torque
    • High vibration resistance
  • Countersunk head with milled ribs. The milled heads below the head mill the screw head contour in the wood, thus providing optimum hold.
  • Torx T40 drive: maximum service life for the bit
  • Full thread
  • High strength Case hardening


Features of finish

  • DELTA PROTECT KL100 surface: Maximum corrosion protection – 720 hour spray test
  • VH 301 GZ silver coating: high-quality visual appearance
  • GLEITMO 605 anti-friction coating: for improved tapping torque

Used for

Fastening HGV load floors in situations where a bore of the same diameter is made through wood and steel frames.

 

Characteristics of screw

  • Taptite 2000® thread
    • Easy to position
    • Low tapping torque
    • High vibration resistance
  • Countersunk head: to fasten the wooden floor firmly to the frame
  • Torx T40 drive: maximum service life for the bit
  • Partial thread: used as depth control when screwed in
  • High strength due to case hardening For steel up to RM = 520 N/mm2


Features of finish

  • DELTA PROTECT KL100 surface: Maximum corrosion protection – 720 hour spray test
  • Delta Seal black GZ coating: high quality visual appearance
  • GLEITMO 605 anti-friction coating: for improved tapping torque